PROJECT WORKSPACE
Projects
Open an existing project or save your current composition as a ZIP file.
Open Project
Open the Music Project ZIP first. If it has a paired Audio ZIP, you can load or skip it.
Save Project
Save your musical Project ZIP. When WAV tracks are present, choose Music Only or a separate Audio ZIP.
Open a Music Project ZIP or save a portable composition with embedded SoundFonts. Optional WAV recordings use a paired Audio ZIP. Browser recovery is separate.
MASTER AUDIO · SEPARATE DOWNLOADS
Export the finished performance
Stereo Mix All of Tracks 1–8: musical SoundFonts and recorded WAVs, individual volume/mute/pan, parallel Chorus/Delay/Reverb, master Compressor, five-band Graphic EQ, Limiter, and Natural Decay Padding. Rendering stays on this computer.
WAV: 16-bit PCM, 44.1 kHz. MP3: 320 kbps stereo at 44.1 kHz; the MP3 encoder requires a one-time library download. Audio is never uploaded.
Import a musical track to enable master export.
Export activity console
Import MIDI
PLAYBACK VIEWER
No song loaded
Select a track and import SymphonyCSV CSV or MIDI (Piano Roll 1–2 / Drums 5–6). TAB Tracks 3–4 accept CSV only.
Choose a SoundFont (.sf2) or use the bundled Upright Piano KW default. Your own SoundFont file stays in your browser.
TRACK 3 · TAB
Measure 001
| Song time | Low E | A | D | G | B | High E |
|---|---|---|---|---|---|---|
| Awaiting Track 3 measure rendering. | ||||||
NOW VIEWING
Measure 001
Awaiting imported drum CSV.
LEFT PANEL · BASS CLEF
Lower staff
Amber notes remain held for their MIDI duration while the upper staff plays.
HELD AT SHARED PLAYHEAD
| Time | Note / duration | State |
|---|
RIGHT PANEL · TREBLE CLEF
Upper staff
Green notes follow their own onsets and note-offs using the same playback clock.
HELD AT SHARED PLAYHEAD
| Time | Note / duration | State |
|---|
A note stays bright until its actual MIDI note-off, even if it began in the previous measure. SoundFont sample tails may decay naturally after note-off. Effects and sustain-pedal controller events are not represented by these note-duration indicators.
THE VISUAL PLAYHEAD
Two panels. One clock.
Left: sustained lower-staff notes in amber. Right: upper-staff notes in green. Both panels share the same playback position; active notes remain visible until their own MIDI note-off, even across measures. The held-note strip remains visible above each event list.
NAVIGATION
Next: Measure —
Jump to a measure, audition a selected range, or play the complete imported composition.
Authentic MIDI-derived pitches, velocities, onset ticks and durations. A selected local .sf2 plays sampled piano notes, using the same actual source-MIDI timing. Without a file, a test synthesizer remains available. Long notes can cross measures. Sustain pedal/other MIDI controller events are not yet interpreted.
MEASURE EDITOR
Compose one measure at a time.
Imported SymphonyCSV · experimental in-memory edits only
FOCUSED EDITING
Measure 001
Add a note or chord
Source notes retain original MIDI timing| Onset (ms) | Pitch | Duration (ms) | Action |
|---|
COMPOSITION BUILDER
Imported SymphonyCSV composition
Inspect note events from the imported composition. Experimental edits remain in memory and never modify the recovered 85-column CSV.
VERSIONING CONCEPT
Experimental draft export (deferred)
An experimental draft export is not a lossless SymphonyCSV export. This is not a lossless replacement for the recovered 85-column source. Original file is unchanged.
This experimental export is NOT the 85-column SymphonyCSV specification. Export to the complete native format is still an engineering task.
SHARED EFFECTS · PARALLEL
Chorus
One shared modulation processor · eight individual sends · no signal passes through Delay or Reverb
Shared Chorus
Each track keeps its dry sound. Set any send to zero for no chorus on that track.
PARALLEL SEND
Independent from Delay and Reverb
Eight tracks feed one chorus processor. Its wet signal joins the unchanged dry mix before the master Compressor and Limiter.
By default the Chorus is off and every send is zero. Your Checkpoint 058 sound stays unchanged until you opt in.
SHARED EFFECTS · PARALLEL
Delay
One shared echo processor · eight individual sends · separate from Chorus and Reverb
Shared Delay
Adjust echo timing and feedback once, then choose how much each track sends to it.
PARALLEL SEND
Clearly audible parallel echoes
The stronger default echo return runs alongside the original dry tracks and the other shared effects. The master Compressor still handles the combined mix.
Feedback is restricted to a safe range. Delay is bypassed and sends are zero by default. No reverb or chorus is applied to the repeats.
SHARED EFFECTS · PARALLEL
Reverb
One shared reverb processor · eight independent sends · original master compressor preserved
Shared Reverb
One shared room for all eight tracks. Zero percent leaves a track dry.
SAFE EXPERIMENT
Room ambience with a longer tail
Adjust the stronger shared reverb sends while playing in Playback Viewer. All eight tracks retain independent dry paths, volume and mute settings.
Chorus, Delay and Reverb are parallel sends, never a serial chain. The existing master compressor and output limiter remain in place.
SOUNDFONT VOICE
Piano · Test Synth
The reverb is applied to whatever instrument each musical track actually uses. WAV-only audio Tracks 7–8 use the same shared effects processors and master chain as musical tracks.
Browser recovery and Project ZIP preserve musical-track sends and WAV send settings. Older saves default to Track 1 only.
MASTER MIX DYNAMICS
Compressor
One existing master compressor · after the dry and shared-reverb mix · before the Master EQ and fixed output limiter
Master Compressor
Controls the dynamics of the complete six-track musical mix, including shared Reverb.
KNOWN-GOOD BASELINE
Stronger master dynamics, still adjustable
Standard processing now uses a firmer 6 dB knee and +6 dB input drive with matched output trim. The visible defaults remain −20 dB, 3:1, 8 ms attack and 180 ms release.
Bypass follows the original dry path, leaving track levels unchanged. The output limiter is not a brick-wall guarantee; lower listening volume before testing strong settings.
ALWAYS-ON OUTPUT STAGE
Limiter remains separate
The existing final output limiter remains enabled and unchanged, after the Master EQ. It is not a brick-wall peak guarantee.
Save to Browser, Recover Session and Project ZIP carry compressor settings. Older saves use the known-good defaults.
MASTER PROCESSING · AFTER COMPRESSOR
Five-Band Graphic EQ
80 Hz · 250 Hz · 1 kHz · 4 kHz · 12 kHz · ±12 dB · independent of master Compressor
Master Graphic EQ
Shapes the complete master mix after compression and before the fixed output limiter.
MASTER SIGNAL CHAIN
Compressor → Graphic EQ → Limiter
All musical tracks and shared effects join the master before this EQ. Bypassing the compressor does not bypass the EQ, and bypassing the EQ preserves its five saved band settings.
Five peaking filters (Q = 1) are used for the graphic approximation. EQ is initially bypassed to preserve the Checkpoint 064 sound.
PORTABLE SETTINGS
One master, one source of truth
Live audition and offline master WAV/MP3 rendering use the same audio graph. Project ZIP and browser-session recovery carry EQ settings; older projects default to flat and bypassed.
The existing output limiter remains downstream. Strong boosts can still increase clipping risk; verify by ear at a safe listening level.